[Avail] Ambassadeur 1500C/2500C Compatible Wide Conversion Kit (Offset Frame, Worm Shaft, Spool 3-Piece Set) [Right-Hand Retrieve] [amb_2520rw_kit_lcr]
Our Selling Price: US$346.50 [Regular Price: US$495.00]
| Ambassadeur 1500C/2500C Wide Conversion Kit
| Product Introduction
This is a 3-piece set of custom parts designed to "widen" (increase the frame width of) your existing 1500C/2500C.
Along with the frame width expansion, we have developed a dedicated spool and worm shaft.
By installing the included dedicated spool, worm shaft, and frame along with the original side cups and internal parts, you can use your reel in a size of the Ambassador series that has never existed before.
The AMB2520RW Microcast Spool is specially designed to match the dedicated wide frame.
Compared to the Microcast Spool AMB2520R, the spool width has been increased by about 4.6mm, allowing for increased line capacity without changing the spool groove depth (2.0mm).
We recommend using this with long grip type rods.
How you use the reel with this kit installed is up to you.
Enjoy customizing your 1500C/2500C with this wide conversion kit using your own creative ideas.
| Color
AMB2520RW 4.6mm Wide Conversion Kit [Right-Hand] Chrome (amb_2520rw_kit_lcr)
| Set Contents
To use the wide conversion kit's dedicated frame, you need the included dedicated spool and worm shaft.
* The reel body is not included.
Please transplant the side cups and other internal parts for use.
| Specifications
Frame Width | |
Wide Conversion Kit Dedicated Frame | 42.6mm |
Frame Offset Amount | |
Wide Conversion Kit Dedicated Frame | 7.5mm |
Spool Dimensions (Diameter mm/Width mm) | |
Microcast Spool AMB2520RW | 30mm / 32mm |
Product Material | |
Microcast Spool AMB2520RW | Extra Super Duralumin |
Wide Conversion Kit Dedicated Frame | Extra Super Duralumin |
Wide Conversion Kit Dedicated Worm Shaft | Extra Super Duralumin |
Wide Conversion Kit Dedicated Worm Shaft Bearing Size |
|
Outer diameter 7mm × Inner diameter 4mm × Thickness 2.5mm (2 can be installed) | |
Product Weight | |
Microcast Spool AMB2520RW | 6.5g |
Wide Conversion Kit Dedicated Frame | 31.8g |
Wide Conversion Kit Dedicated Worm Shaft | 4.7g (including 2BB) |
Line Capacity | |
Microcast Spool AMB2520RW (Groove depth: 2.0mm) |
PE 0.6-130m |
AMB2520RW Compatible Brakes | |
[Magnetic Brake] | |
Microcast Brake AMB1520 | |
Microcast Brake AMB1520PE | |
[Centrifugal Brake] | |
4P Brake 4P-BRAKE-25C Type2 | |
Ambassadeur 2500C Centrifugal Brake "Kaiketsu Porori" |
* Line capacity measured using Yamatoyo Tegusu Co., Ltd. line.
| Compatible Models
- ABU Ambassadeur
- 1500C/1500CDL/150PLUS
- 2500C/2500CI/2500CDL etc.
* Compatible with both IAR and non-IAR models.
* Not compatible with thumb bar models such as 1600C/2600C.
* Not compatible with 3500C series.
| Worm Shaft/Level Wind Installation Method
The installation method is the same as for the Aluminum Worm Shaft for Ambassadeur 1500C/2500C.
Please refer to the video below for the replacement process.
| Spool Installation Method
The installation method is the same as for the Microcast Spool for ABU Ambassadeur 2500C.
Please refer to the video below for the replacement process.
| Frame Installation Method
The installation method is the same as for the Aluminum Offset Frame MF7.5 for Ambassadeur 2500C.
Please refer to the video below for the replacement process.
| Maintenance
Aluminum Offset Frame 7.5
The screws in the reel foot fixing part and the thumb bar fixing part may loosen with use.
Regularly check for looseness and tighten if necessary.
The tool sizes are No. 2 Phillips screwdriver for the foot part and M2 hex wrench for the thumb bar part.
Depending on the shape of the reel seat, installation may not be possible, may be loose, or may interfere with the reel seat.
If the installation is loose, please use your ingenuity, such as applying thick vinyl tape to the back of the foot.
There are countless reel seats, and many are unconfirmed.
Please understand that we may not be able to respond to inquiries in some cases.
| Precautions
* Start with the MAX setting for brake settings when casting.
* The Microcast Spool is thinned to the limit of necessary strength for weight reduction.
Due to the large internal cavity design for shallow groove, the reel's drive sound may resonate inside the spool and sound louder.
This does not affect actual fishing, so please use with confidence.
* If you use the spool rim for thumbing, the anodizing may peel off due to friction.
Please perform thumbing on the line winding surface of the spool.
Applying too much tension when winding line onto the spool may cause damage.
Especially when winding stretchy lines like nylon, please wind with looser tension.
| Gallery