[Avail] SHIMANO Narrowcast Spool for 21 CALCUTTA CONQUEST 100/101 [21CNQ1034RN]

Narrowcast Spool 21CNQ1034RN for SHIMANO 21 CALCUTTA CONQUEST 100/101

Model Name

NS-21CNQ1034RN


Product Introduction

The angle of line release becomes shallower by narrowing the level winder’s movable range compared to the genuine part.
This reduces line release resistance during casting, improving the casting feel.
Additionally, it decreases resistance when lines rub against each other, prolonging line life and reducing troubles.
To use the NS-21CNQ1034RN Narrowcast Spool, the separately sold aluminum worm shaft for 23CNQ20RN is required.
Particularly, the separately sold Aluminum Worm Shaft for 23CNQ20RN has a high installation difficulty, so please be sure to watch the installation video at the bottom of the page before considering your purchase.
Disassembly and installation should be carried out at your own risk.




Color



Black


About Brakes

This product does not include a brake.
- Magnet Brake (Recommended)

Please use the separately sold NB-21CNQ100.

- Centrifugal Brake
Use the separately sold puller for the NEW SVS Infinity, remove the genuine SVS Infinity, and transplant it to this product.


About the Narrow Cast Spool



The worm shaft is specifically designed to match the spool’s thread width.
By narrowing the movable range of the level wind, the angle of line release becomes shallower, reducing line release resistance during casting and improving the casting feel.
Additionally, it decreases resistance when lines rub against each other, prolonging line life and reducing troubles.
*The above image is an illustration using the 23 CALCUTTA CONQUEST BFS.


Specifications

Line Capacity

*Line capacity measured using PE line from Yamatoyo Tegusu.


Worm Shaft Installation Method & Video

*The “23 CALCUTTA CONQUEST BFS” explains the worm shaft installation method.
The installation method is common to the 21 CALCUTTA CONQUEST 100 and the 23 CALCUTTA CONQUEST BFS.


Spool & Magnet Brake Installation Method

Cautions


*The microcast spool is designed to be as thin as possible to reduce weight while providing enough strength.
Due to the large hollow design inside the spool, the reel's operational noise may echo, making it sound louder.
This does not affect actual fishing, so please use it with confidence.
When winding a line on the spool, excessive tension can cause damage.
*For quality maintenance, anti-rust grease is applied to the bearings during shipment.
If the spool rotation feels heavy, please degrease and lubricate the bearings with your preferred oil before use.
*When replacing bearings, be careful not to damage the shaft or drive pin and do so at your own risk.


Gallery