[DAIWA] "Kattobi" Spool Bearing Kit - AIR BFS SW - [1030AIR BFS SW & 830AIR BFS SW] [AIR BFS SW Bearing] for Silver Creek AIR TW, GEKKABIJIN AIR TW, ALPHAS AIR TW

Product Description

*With an instruction manual included, even beginners can easily replace the bearings.
*This product is a set of two tuning bearings designed specifically for bait reel spools.
*If you do not have a pin removal tool, we recommend purchasing one together.
→ For more information about the Spool Bearing Remover, please see here.


AIR BFS is a new anti-rust bearing for saltwater applications that offers overwhelming rotational performance.
The AIR BFS (Bait Finesse Special) bearing has a detachable housing, allowing for the replacement of worn internal bearings.
The extremely small micro balls characteristic of AIR Bearings are made from high-precision stainless steel, providing excellent noise reduction during rotation.

The AIR BFS SW Bearing helps cast bait finesse and lightweight plugs in any field, whether freshwater or saltwater.

*AIR BFS SW bearings are double-sided shielded bearings.


AIR Bearing Technology







The AIR BFS SW bearing allows easy replacement of the main micro bearing from the outer housing by removing the built-in stopper ring.
This bearing has a high cost-performance ratio due to its easy-to-maintain construction.
Anti-rust micro bearings and stopper rings for replacement are also available separately.



Anti-rust micro bearings for replacement HRCB-630ZHi



Dedicated stopper ring 6 mm




* When fully casting a lure weighing 20g or more, the maximum reachable distance is about the same for all bearings, but the AIR bearing series is easier to control at short distances such as pitching.
(For lightweight lures weighing less than 20g, the AIR bearing series will increase the distance of a full cast compared to a regular bearing.)

* AIR BFS bearings are a cost-reduced version of AIR ceramic bearings.
It does not mean that AIR BFS bearings are more likely to produce greater distance when used in bait finesse than AIR ceramic bearings.
Even if only ultra-lightweight lures are used, the AIR ceramic bearing will provide superior total balance.

* If you want to use the highest performance bearing, choose the AIR Ceramic Series.
Lure weighing less than 20g → AIR Ceramic Bearing
Lure weighing more than 20g or used mostly in saltwater → AIR HD Ceramic Bearing

* The above recommended weights are for casting. Even heavier loads can be applied when not making full casts, such as jigging or offshore fishing.
(AIR Ceramic Bearing is recommended for offshore fishing when increasing the sinking speed of the trap is important, and AIR HD Ceramic Bearing is recommended for jigging main use.)

* All bearings can be used in saltwater, but the AIR HD ceramic bearing has the best corrosion resistance, followed by the ZHi bearing.


Compatible Models

[DAIWA]

- 12 TD ZILLION J-DREAM
　( 5.3Ｒ, 5.3L, 6.3R, 6.3L, 7.9R, 7.9L )

- 07 TD ZILLION HLC
　( 100H, 100HL )

- 08 TD ZILLION PE SPECIAL
　( 100H, 100HL )

- 22 TATULA TW 80
　( 80, 80L, 80H, 80HL, 80XH, 80XHL )

- 20 TATULA SV TW
　( 103H, 103HL, 103SH, 103SHL, 103XH, 103XHL )

- 19 TATULA TW
　( 100H, 100HL, 100SH, 100SHL, 100XH, 100XHL )

- 17 TATULA SV TW
　( 6.3R, 6.3L, 7.3R, 7.3L, 8.1R, 8.1L )

- 15 TATULA HLC
　( 7.3R-TW, 7.3L-TW, 8.1R-TW, 8.1L-TW )

- 14 TATULA HD CUSTOM
　( 150H-TW, 150HL-TW, 150SH-TW, 150SHL-TW )

- 14 TATULA
　( 103H-TW, 103HL-TW, 103SH-TW, 103SHL-TW, 103XH-TW, 103XHL-TW )

- TATULA CT
　( TACT100H, TACT100HL, TACT100HS, TACT100HSL, TACT100P,TACT100XS )

- TATULA CT TYPE-R
　( TACT-R100H, TACT-R100HL, TACT-R100HS, TACT-R100HSL, TACT-R100XS, TACT-R100XSL )

- TATULA
　( 100HL, 100HSL, 100H, 100HS, 100P )

- TATULA TYPE-R
　( R100H, R100XS, R100HL, R100XSL )

- 20 ALPHAS AIR TW
　( 7.1R, 7.1L, 8.6R, 8.6L )

- 19 ALPHAS CT SV
　( 70H, 70HL, 70SH, 70SHL )

- 15 ALPHAS SV
　( 105, 105L, 105SH, 105SHL )

- 11 ALPHAS FINESSE CUSTOM
　( 105H, 105HL )

- 22 Silver Creek AIR TW STREAM CUSTOM
　( 8.5R, 8.5L )

- 11 PX68 SPR

- 10 PX68
*If you have a I'ZE FACTORY FINESSE SPECIAL SPOOL for PX68 installed, it will be a combination of [830 & 830].

- PX TYPE-R - USA model -

- 21 GEKKABIJIN AIR TW PE SPECIAL
　( 8.5R, 8.5L )

- 08 MILLIONAIRE HL-SSS RINGA
　( 103, 103L )

- 16 HRF PE SPECIAL
　( 7.3R-TW, 7.3L-TW )

- 23 KOHGA
　( 100, 100L, 100XH, 100XHL )

- 17 FUEGO CT
　( 103H, 103HL, 103SH, 103SHL )


*Note

The 22 Silver Creek AIR TW Stream Custom, Alphas AIR TW, and Gekkabijin AIR TW PE SPECIAL reels have special small-diameter spools, so bearings other than AIR BFS (SW) cannot be installed.
Additionally, the Spool Bearing Remover Type: R cannot be used.
When replacing bearings, please use SLP WORKS Spool BB Remover II.


[Megabass]

- IP68
- IP79
*If you have a Megabass Honeycomb Spool installed, it will be a combination of [1150 & 830].


How to replace the bearing of PX68



The bearing replacement points are in the side cover section and the spool shaft section.

For detailed replacement instructions, please refer to the following page.




How to replace the bearing of TATULA



The bearing replacement points are in the side cover section and the interior of the mechanical brake knob section.

*In the case of TATULA bearing replacement, spool bearing remover is not necessary.

For detailed replacement instructions, please refer to the following page.




How to replace the bearing of Megabass IP and TD ZILLION



The bearing replacement points are in the side cover section and the interior of the mechanical brake knob section.

For detailed replacement instructions, please refer to the following page.