21 NEXAVE FI Line Roller 1 Bearing Upgrade Kit [B-TYPE]

Description

* The commercial product is the tuning kit, Not the fishing reel.
* Please select bearing type.



SHG bearing

The high-sensitive bearing whose rotary performance is terrific is for professional use. The products were carefully selected by hand work from the crowd of other bearings.
The rotational performance is superior to HRCB, and there is no rival for its ultimate smoothness.
This is the bearing to tune up for professional-use. It is very suitable for a high sensitivity reel to challenge by delicate tackle.



HRCB bearing

The new technique that metal itself is hard to get rusty very much by special manufacturing method is adopted.
The bearing is resistance to salt water.
And the derusting performance is more than ten times compared with SHG.
It makes rotation feeling like silky smoothness that's quite unique to HEDGEHOG STUDIO.
That helps tough fishing situation that requires both rotation performance and durability in a high level.
It is the next-generation anti-rust bearings for Salt Water angler.

How to choose bearings

SHG bearing : for freshwater fishing such as Bass/Trout or fishing which attaches importance to sensitivity by using light weight lures

HRCB bearing : for overall saltwater fishing which attaches importance to anti-rust effect
(Although you can use SHG bearing on saltwater fishing, HRCB bearing is more suitable because of its durability.)

Contents

* Adding 1 bearing is possible by the kit.

for 1 Bearing Line Roller System

Line Roller Bearing (SHG-740ZZ or HRCB-740ZHi) x 1pc
Roller Bush (for 1BB) x 1pc
Roller washer (0.8mm) x 2pcs
Illustration Manual


Instructions

for 1 Bearing Line Roller System

If the line roller is genuine, it does not contain any bearings, so it is possible to add one new bearing to make a 1BB specification line roller.
(These reels are only 1BB specification because it is structurally impossible to put two bearings in the line roller.)

The better the rotation of the line roller, the less likely it is that the yarn will twist, so the suppleness of the yarn will be maintained, and durability and flight distance will also improve.




First, remove the screws that secure the line roller and disassemble it.



The parts at the top of the photo are genuine products.
Replace the parts surrounded by the red frame with the parts included in the kit and reattach.




First, fit the bearing into the roller bush that comes with the kit.




Next, install the parts assembled earlier into the line roller body.
At this time, pay attention to the orientation of each part.




Attach the line roller body that incorporates the parts to the reel.
Also at this time, pay attention to the orientation of the parts.




If there is no problem, it can be installed as shown in the picture.




Attach the genuine white plastic ring to the part indicated by the arrow.




Stack the two metal washers included in the kit and install them in the part indicated by the arrow in the photo (inside the line roller body).




Attach the genuine metal spacer to the arrow part of the reel body.




Finally, raise the arm so that each part does not fall apart, and fix it again with screws to complete the work.
Check if the line roller rotates properly.
If it does not rotate properly, disassemble it again and check that each part is properly installed.


Compatibility

21 NASCI
( 500, 1000, C2000S, C2000SHG, 2500, 2500SHG, 2500HG, C3000, C3000DH, C3000HG, 4000, 4000XG, C5000XG )

16 NASCI
( 1000, C2000S, C2000HGS, 2500, 2500HGS, C3000, C3000HG, C3000DH, 4000, 4000XG, C5000XG )

17 SEDONA
( 1000, C2000S, C2000HGS, 2500, 2500HG, 2500S, 2500PE, C3000, C3000HG, C3000DH, 4000, 4000XG, C5000XG )

22 SAHARA
( 2500, 2500SHG, C3000, C3000DH, C3000HG )

17 SAHARA
( 1000, C2000S, C2000HGS, 2500, 2500HGS, C3000, C3000HG, C3000DH, 4000, 4000XG, C5000XG )

19 SPHEROS SW
( 3000XG, 4000HG, 4000XG )

21 NEXAVE FI
( 1000, C2000S, 2500, 2500S, 2500HG, C3000, C3000HG, 4000, 4000HG, C5000HG )