21 SPHEROS SW 5000HG, 6000PG, 6000HG Line Roller 1 Bearing Upgrade Kit

Description

* The commercial product is the tuning kit, Not the fishing reel.
* Please select bearing type.



SHG bearing

The high-sensitive bearing whose rotary performance is terrific is for professional use. The products were carefully selected by hand work from the crowd of other bearings.
The rotational performance is superior to HRCB, and there is no rival for its ultimate smoothness.
This is the bearing to tune up for professional-use. It is very suitable for a high sensitivity reel to challenge by delicate tackle.



HRCB bearing

The new technique that metal itself is hard to get rusty very much by special manufacturing method is adopted.
The bearing is resistance to salt water.
And the derusting performance is more than ten times compared with SHG.
It makes rotation feeling like silky smoothness that's quite unique to HEDGEHOG STUDIO.
That helps tough fishing situation that requires both rotation performance and durability in a high level.
It is the next-generation anti-rust bearings for Salt Water angler.

How to choose bearings

SHG bearing : for freshwater fishing such as Bass/Trout or fishing which attaches importance to sensitivity by using light weight lures

HRCB bearing : for overall saltwater fishing which attaches importance to anti-rust effect
(Although you can use SHG bearing on saltwater fishing, HRCB bearing is more suitable because of its durability.)


Contents

* Adding 1 bearing is possible by the kit.

for 1 Bearing Line Roller System
Line Roller Bearing (SHG-840ZZ or HRCB-840ZHi) 1pcs
Roller washer (4mm x 6mm x 0.10mm) 1pcs

* There is no installation manual, so please refer to the installation method below.

Compatibility

21 SPHEROS SW
5000HG, 6000PG, 6000HG


Instructions



This is a disassembled photo of the parts of the line roller.
Simply add an adjustment roller washer between the spacer and the line roller and replace the collar and bearings.




First, set the spacer and then insert the roller washer for adjustment.




Integrate line rollers, bushes and bearings.



The bearing feels a little tight, but use a bearing check tool or the tip of disposable chopsticks to push the bearing firmly into the bush.




Install the integrated line roller.




Install the washer.




Finally, attach the screws to complete.