[DAIWA] 20 LUVIAS FC LT2000S, FC LT2000S-XH, FC LT2500S, FC LT2500S-XH, LT2500, LT2500-XH, LT3000-C, LT3000S-CXH, LT3000, LT3000-XH, LT4000-C, LT4000-CXH [Single Handle Model] for MAX12BB Full Bearing Upgrade Kit

Description

* The commercial product is the tuning kit, Not the fishing reel.
* Please select bearing type.



SHG Bearing

The high-sensitive bearing whose rotary performance is terrific is for professional use.
The products were carefully selected by hand work from the crowd of other bearings.
The rotational performance is superior to HRCB, and there is no rival for its ultimate smoothness.
This is the bearing to tune up for professional-use.
It is very suitable for a high sensitivity reel to challenge by delicate tackle.



HRCB Bearing

The new technique that metal itself is hard to get rusty very much by special manufacturing method is adopted.
The bearing is resistance to salt water.
And the derusting performance is more than ten times compared with SHG.
It makes rotation feeling like silky smoothness that's quite unique to HEDGEHOG STUDIO.
That helps tough fishing situation that requires both rotation performance and durability in a high level.
It is the next-generation anti-rust bearings for Salt Water angler.

How to choose Bearings

SHG Bearing : for freshwater fishing such as Bass/Trout or fishing which attaches importance to sensitivity by using light weight lures

HRCB Bearing : for overall saltwater fishing which attaches importance to anti-rust effect
(Although you can use SHG bearing on saltwater fishing, HRCB bearing is more suitable because of its durability.)


It is the Full set of tuning kit consists of :
High-performance bearing / Peculiar parts / instructions
This one is for beginner tuners. We prepare and send all the necessary items.
* Please prepare drivers or pliers yourself.

Contents

* Adding 3 Bearings is possible by the kit.


for 2 Bearing Handle Knob System

Handle Knob Bearing :
SHG-740ZZ or HRCB-740ZHi x 1pc


for 2 Bearing Drag System

Spool Shaft Bearing :
SHG-1170 or HRCB-1170Hi x 1pc

Spool Inside Bearing :
SHG-1060 or HRCB-1060Hi x 1pc


Small Wrench x 1pcs
Illustration Manual

Instructions

for Bearing Drag System (Spool Inside Bearing)



If you remove the drag washers inside the 20 LUVIAS spool, you can see the collar at the back.

The finesse spool drag bearing tune replaces this collar with a bearing.

By adding a bearing to this part, the rotation of the drag can be made smoother, the clinging of the drag is reduced, and smooth line emission during fighting is supported.


for Bearing Drag System (Spool Shaft Bearing)



The plastic ring attached to the spool shaft of 20 LUVIAS can be replaced with a bearing to improve drag performance.

By making this part that supports the spool into a bearing, it becomes a drag that allows a smoother start.


for 2 Bearing Handle Knob System



Replace one collar inside the 20 LUVIAS handle knob with a bearing.

Although the reel has a smooth winding feeling thanks to the benefits of the air rotor and highly accurate tough digital gear, adding bearings to the handle knob can further improve the quality of winding comfort and sensitivity.


* When installing this kit, do not touch the parts with the built-in mag shield (the part under the rotor where the mag shield is engraved).
Therefore, please be assured that the mug shield will not come off during work.

* It is also easy to reassemble the parts and return the reel to the genuine state.

Compatibility

* The photo is FC LT2500S-XH

DAIWA 20 LUVIAS

FC LT2000S, FC LT2000S-XH, FC LT2500S, FC LT2500S-XH, LT2500, LT2500-XH, LT3000-C, LT3000S-CXH, LT3000, LT3000-XH, LT4000-C, LT4000-CXH