Line Roller 1 Bearing Upgrade Kit [A-Type] for SHIMANO spinning reels

[Product concept]

※ selling product is tuning kit, you are not in the reel body.
※ When you select the type of bearing, you will see each of the selling price.




With an emphasis on rotational performance, high sensitivity bearing of the tournament specifications.


It was adopted strong new material to corrosion, salt water corresponding bearing, which boasts the best of anti-rust and durability performance.

(Bearing of choice)
SHG premium bearing the light lure of freshwater fish and high-sensitivity-oriented, such as trout bus. The all saltwater fish in Salt General is recommended HRCB anti-rust bearings. ※ SHG is also salt can be used but, HRCB if to emphasize the durability is the best.

MAXBB full bearing tuning kit, can be added to BB from commercially available state until the maximum mounting number, "of dedicated bearing dedicated parts such-Manual" is a tuning kit which is full set. Recommended for beginners! We will send to align all the necessary things. ※ simple tool such as a screwdriver or pliers Please prepare.


[Contents of the tuning kit]

(Tuning menu)
line roller 1BB specification bearings tune

(contents)
・line roller for BB (SHG-740ZZ or HRCB-or
・roller bush (for 1BB) × 1 single
・roller spacer × 1 one
・tuning manual




Because the corresponding model reel of line roller is genuine and does not enter the bearing is also one, it is possible to the line roller of 1BB specifications newly added one of the bearing.
(Because these reels can not put two bearings to structurally line roller, it will be the only 1BB specification.)

Since the rotation is well made and yarn twist of the line roller is less likely to occur, the suppleness of the yarn kept, also improves durability and distance.


[Compatible models]

・16 AERNOS
(1000, 2000, 2500, C3000)
・12 AERNOS XT
(1000, 1000S, 2000, 2500, 2500S, C3000, C3000SDH)
・ 09 AERNOS XT
(1000, 1000S, 2000, 2500, 2500S, 2500SDH, C3000)
· 05 AERNOS XT
(1000, 2000, 2500, 2500S, 2500D, C3000)
· 06 AERNOS XTL
(2500A, C3000A)
· 12 AERNOS
(1000, 2000, 2500, 2500S, C3000)
· 09 AERNOS
(1000, 2000, 2500, 2500S, 2500SDH, C3000)
· 05 AERNOS
(1000, 2000, 2500, C3000 )
4000 number or more mounting is possible on both each age ※.

・19 Siena
(1000, 2000, 2500, C3000, 4000)

・ 19 FX [FX]
(1000, 2000, 2500, C3000, 4000)

・18 NEXAVE
(1000, C2000S, C2000SHG, 2500 , 2500HG, 2500S, C3000, C3000HG, C3000DH)
※ 4000 number or more mounting is possible on both each age.

・ 18 Sedona
(500)
- 15 Sedona
(1000, 1000S, 2000, 2500, 2500S, 2500S PE, C3000, C3000SDH, C3000HG)
※ 4000 number or more mounting is possible on both each age.

· 18 Sahara
(500)

・11 ALIVIO
(1000, 2000, 2500, C3000)
・ 05 ALIVIO
(1000, 2000, 2500, C3000)
※ 4000 number or more mounting is possible on both each age.

・ 09 Aorisuta BB
(2500, C3000)
※ 4000 number or more mounting is possible on both each age.


[Mounting method]

the ※ 15 Sedona has been described as an example.



First, take out the parts of the internal line roller Loosen the screws.





The part surrounded by a red frame of genuine parts and replace it with enclosed custom parts in orange.




First, you first install the bearing in the roller bush.




Then attach the line roller body. Please be aware of this when mounting orientation. Attach a photograph of orientation.




Since pops out from the line roller roller bush a little, please fit snugly without gaps genuine ring to that part. When installing the genuine ring is a little tight, but you can be linked to the bush snugly in the feeling that "snap".




Attach the line roller body and roller spacers on the reel.




Finally, tighten the screws, line roller is the work completed if the rotation without any problems.