[Avail] SHIMANO Microcast Spool BTM2039RMAG for Bantam 200 MAGCAST

Model

Microcast Spool BTM2039RMAG (Spool rim level:3.9mm)


Description


Reel: Bantam 21SG MAGCAST


Color


Black


Gunmetal


Red


Feature

July 2022 renewal has been implemented.
As with previous models, the groove depth is designed at 3.9mm.
While increasing line capacity, we have achieved a weight reduction of approximately 0.2g compared to the previous model.


Major Changes




(Above: Old type Microcast Spool BTM1039MAG)




(Above: New type Microcast Spool BTM1039RMAG)

The spool body has been spoked to achieve a weight reduction of 0.2g compared to the previous product.
In addition, the brake rotor color is changed from red to silver.
There is no change in the amount of thread winding.


Spec

Basic Specifications

Material
Spool part: Duralumin (colored by anodizing)
Shaft part: Stainless steel
Brake rotor: Duralumin

Compatible reels
Bantam MAGCAST 200SG/20SG/21SG
*Please note that it cannot be attached to MAGCAST 201SG.


Weight

Spool/Weight/Weight ratio
Microcast Spool BTM2039RMAG/14.2g/55.6%
Microcast Spool BTM2039MAG/14.4g/56.5%
Genuine spool(Bantam MAGCAST 21SG)/25.5g/-

Weight may vary slightly depending on the production lot.
*About 0.2g lighter than the previous model.


Line Capacity

Microcast Spool BTM2039RMAG

12Lb: φ0.285mm/100m
14Lb: φ0.310mm/85m
16Lb: φ0.330mm/75m

The above values were measured using fluorocarbon line, wound to the full spool rim.
Measurements were taken using fluorocarbon line (Fluorovaluestar) manufactured by Yamaho Tegus Co.

* If you feather the reel with your thumb using the spool rim, the alumite may come off due to friction.
Feather a reel with your a thumb, use the spool's spool surface.