【Abu】 Level Wind Shaft 【LTX】 GUNMETAL

---

｜Description of the product

---

※Can be used for both left and right handles.

※In order to attach the parts, you need to disassemble the gear box.

---

｜Corresponding Models

---

〜　JAPAN MODEL　〜

■Revo
　（LTX / MGX / LT / ALT）

〜　USA MODEL　〜

■Revo
　（MGX）

---

｜Instruction Manual

---

From here on in, we will explain to you how to change out the stock parts to our
custom ones. Please when taking your reel apart pay special attention not to lose
or misplace any pieces you have removed from your reel.



Please refer to this link for the first half on disassembly.
The LTX series reels require a little more disassembly than the elite series ones.



Please remove the e-ring with a small minus head screw driver.
Please be careful not to lose this ring.



Next, please remove the e-ring from the opposite side as the previous one.



After you have removed both e-rings,
you can remove the level wind shaft from the reel.



After you have changed out the level wind shaft with the new one,
please replace the holder back to the original position and replace the e-ring.



Please replace the second e-ring.



The next steps are to replace the removed parts back to their original position.
Please refer to this link if you have any doubts.