[Avail] SHIMANO Microcast Spool MT0025, MT0039 for 97 Metanium XT・00 Metanium Mg
[Avail] SHIMANO Microcast Spool MT0025, MT0039 for 97 Metanium XT・00 Metanium Mg
Our Selling Price: US$80.08 [Regular Price: US$114.40]
Retail Price: US$111.96
Not available
|Regarding the stock of AVAIL product
It takes us two to three days to get ready to send Avail products
because we order them from the Avail factory.
Sometimes they might be out of stock at the timing of your order.
In the case of a stockout, we refund your purchase price immediately.
|Type and description
Avail Microcast Spool MT0025
(The spool rim level is 2.5mm)
Avail Microcast Spool MT0039
(The spool rim level is 3.9mm)
This model is for '97 Metanium XT and '00 Metanium Mg.
You can use a magnetic brake "Microcast Brake SHSC-05A".
※This model is NOT compatible with Microcast Spool MT0078.
|Spool colors
・BLACK
・NAVY
・RED
・PURPLE
・ORANGE
・GUNMETAL
|Braking system options
With No brake
※When you just remove SVS from your genuine spool and use it, please choose here.
At the most reasonable price, you can try the performance of lightweight spool.
With a magnetic brake
"Microcast Brake SHSC-05A"
※ Although the attachment would be difficult, fine tuning of the magnetic brake is possible even with SHIMANO reel.
|Spec
|Material
Spool : extra super duralumin
Shaft : stainless-steel
|Compatibility
'97 Metanium XT
'00 Metanium Mg
|Weight
Microcast Spool MT0025 : 8.3g
(The weight ratio against genuine product approximately 77.5%)
Microcast Spool MT0039 : 8.3g
(The weight ratio against genuine product approximately 77.5%)
SHIMANO genuine spool : 10.7g
|Line capacity
MT0025 12Lb-55m:10Lb-65m:8Lb-85m
MT0039 12Lb-90m:10Lb-105m:8Lb-135m
※The numerical value mentioned above is the result of measuring by winding nylon line up to the edge of spool rim.
|Instruction
(It is possible to use both magnetic brake and centrifugal brake.)
|How to replace SVS
This is genuine spool.
Brake unit is press-fitted.
Please remove the unit off the spool without damaging the brake.
Press SVS into plastic part of the shaft to fix it.
Adjust the brake just like genuine spool.
Since the total weight of spool gets lighter, you will use less number of brake block.
If you need more fine tuning, please consider our magnetic brake.
|How to use magnitic brake
Brake unit is required separately.
"Microcast Brake SHSC-05A" is compatible with the product as well as '07 Metanium Mg, '09 ALDEBARAN, CONQUEST series etc..
Microcast Brake SHSC-05A
As pictured above, the palming cup is needed to be open.
(You need to disassemble and assemble the main unit.)
Press the brake unit into the bearing that catches spool to fix it.
Adjust the brake by changing the level of the brake unit.