[Avail] SHIMANO Microcast Spool MT1620RI, MT1636RI, MT1670R for 16 METANIUM MGL

Microcast Spool MT1620RI (depth 2.0mm)
Microcast Spool MT1636RI (depth 3.6mm)
Microcast Spool MT1670R (depth 7.0mm)


Description



reel: 16 Metaniumu MGL XG RIGHT
reel to the mounting already Avail products
Microcast spool MT1620RI Purple
MicrocastBrake ALD15
hexagonal star drag 2 Purple
offset handle LT 90mm black
Shimano handle nut M7 black
16 Metaniumu MGL mechanical brake knob Purple for
wood flat knob Santos Rosewood
GM knob cap without brim purple

It is a microcast spool for SHIMANO 16 Metanium MGL.
16 Metanium MGL is a reel that plays an active part in almighty due to its easy palming design and lightweight weight.
Since the reels are used for a wide range of purposes, we have lined up three types of dedicated spools.
Shallow trenches type MT1620RI is capable of retrieving at a faster speed than the small diameter spool bait finesse dedicated during or approach accurately lightweight rig as handled by bait finesse dedicated reel, the fast winding of the shad and small crank , more Tegaeshi good fishing can be deployed.
MT1636RI to be the middle of the groove depth is the Almighty spool to respond flexibly to tackle Medium Light to heavy class.
It is available at a high level until the heavier of the lure from lightweight lure depending on the thickness of the winding line.

Deep groove type of MT1670R the big size aim and powerful river bass capture.
Also a capacity sufficiently able to stock the essential thick line to large long shot from the Paris Tsu land.
It is also recommended to flipping go by implanting good tempo to heavy cover with a thick line.

Brake system of MT1620RI and MT1636RI the "magnet brake" or, "Porting a genuine SVS Infiniti", please use by choosing one of the.

Since MT1670R is "centrifugal brake only", please use by transplanting the genuine SVS Infiniti.


Color



BLACK



RED



PURPLE



SKY BLUE



CHAMPAGNE GOLD


Spec

Basic specifications

Material
spool parts: Ultra duralumin (colored by anodized)
shaft parts: stainless steel

Size
Microcast Spool MT1620RI groove depth is the: 2.0 mm
Microcast Spool MT1636RI depth: 3.6mm
Microcast Spool MT1670R groove depth: 7.0 mm

Compatibility
16 Metaniumu MGL LEFT / RIGT
16 Metaniumu MGL HG LEFT / RIGT
16 Metaniumu MGL XG LEFT / RIGT


Weight

(spool) (wt)
Microcast Spool MT1620RI 11.4g
Microcast Spool MT1636RI 11.8g
Microcast spool MT1670R 11.8g
16 Metaniumu MGL genuine spool 11.8g

* Both genuine spools and our spools were measured without SVS.
The weight of SVS Infinity and brake unit is 2.6g.


Line Capacity

spool MT1620RI
8Lb Fai0.235Mm 45M
10Lb Fai0.260Mm 40M

spool MT1636RI
12Lb Fai0.285Mm 60M
14Lb Fai0.310Mm 50M

spool MT1670R
16Lb Fai0.330Mm 95M
20Lb Fai0.370Mm 70M

Yamatoyo gut (stock) like fluorocarbon line ( It measured using the Fluorochemicals Baryusuta).


Notes

If you were thumbing using a spool rim, there is a possibility that the anodized aluminum is peeled off by friction.
Please be carried out in the wound surface of the spool especially summing is.
When winding the line on the spool, it can cause damage too over strong tension.
In particular, when winding the line with growth, such as nylon line, please use wound to loosen the tension.


Accessory



comes with an O-ring on the spool shaft.
If you want to use a magnet brake, please use it.
The position of the O-ring has put the color to green so that easy to understand.



O-ring is attached to the spool shaft.
If you want to use by transplanting the SVS Infiniti, please use mounting an O-ring like a photograph.
The position of the O-ring has put the color to green so that easy to understand.


Brake System



because MT1620RI and MT1636RI is equipped with a brake disk to spool inner wall, and then adapted to the Magnet Brake MT16K or centrifugal brake (installed simultaneously is not allowed).
Please use to select your choice.



MT1670R because not equipped with a brake disc, it will be the centrifugal brake only.
Please use by transplanting the genuine brake unit.


How to attach the Magnet Brake

It is natural that SHIMANO’s outside dial is not considered to be matched to Avail’s magnet brake system as SVS infinity is made to be functioned smoothly.
Hence, when you adjust the brake dial correctly to 1 or 2, almost no brake is available.
But, it is not defective.
Adjust the brake function as long as it is available and use it.


Detach the side cover from the reel body and take 3 bolts from the Frame B set inside.


It is in the removed state.
Be careful not to lose the fixing bolts.


Remove the golden brake pipe gear by twisting it in a spiral.


Contrary to the removal of the brake pipe gear, insert the claw inside the magnet brake body into the cut of the Frame B set and screw it in.


Align the external dial 1 so that it is in the brake position, and fix the Frame B set with three fixing bolts.
This completes the installation work of the magnet brake.