[MTCW] Original Line Roller ZERO *SPLN

M.T.C.W. Line Roller -ZERO-

The unique angle of the line roller allows even ultra-fine lines to be instantly placed in the line roller.
The line can be neatly wound around the spool, which improves drag performance and greatly reduces backlash and other line problems.
It also leads to an increase in casting distance for the next cast, enabling stress-free fishing.
It has an overwhelming presence not only in terms of functionality but also as a single point of reference on the reel.

Special Characteristic

- Reduced line trouble
- Increased reel sensitivity
- Improved drag performance
- Improvement in flying distance
- Reduced line sagging
- Lightweight


Color



Gold



Gunmetal


How to install the Line Roller ZERO for light game only

- SHIMANO

1. First, remove the genuine line roller and remove all contents.

Genuine line roller

Genuine 10 STELLA


Genuine 14 STELLA


Genuine 18 STELLA


Genuine 16 Vanquish


Line Roller ZERO Aluminum

10 STELLA Line Roller ZERO Aluminum


14 STELLA Line Roller ZERO Aluminum


18 STELLA Line Roller ZERO Aluminum


16 Vanquish Line Roller ZERO Aluminum


Attach the parts of the line roller ZERO in this order: 1. 2 shims, BB 0.2 shim, ZERO main unit, BB 0.5 shim, and the genuine support plate.
When installing the line roller ZERO, pour MT-04 or other OIL into the BB while assembling.

3. Check if the line roller is turning firmly.。
If the line roller does not turn well, try loosening the screws a little.


- DAIWA

1. First, remove the genuine line roller and remove all contents. (There may be some genuine weights, etc., attached to the weights in a hidden place.)

Genuine line roller


Line Roller ZERO Aluminum


Install the following in this order: 1.2 shim, BB 0.2 shim, ZERO main unit, BB 0.8 shim, starting from the bail side.

*LUVIAS should be installed without 0.8 shims.
DAIWA reels under 05 have the same line roller shape but different mounting shims.

When installing the line roller ZERO, pour MT-04 or other OIL into the BB while assembling.

3. Check that the line roller is turning firmly.
If the line roller does not turn well, try loosening the screws a little.


2 gram weight image

4. 2 gram weight for DAIWA is included.
Rotor may swing when converted to 2BB.
If it swings, install a weight inside the rotor.
Caution: Be sure to degrease the weight attachment points and remove grease before attaching the weight.
(If the weight is installed and hits the spool, insert adjustment shims and raise the spool.)


Compatibility

- for SHIMANO



- for DAIWA and NEW DAIWA