[Avail] ABU Microcast Spool AMB2520R, AMB2540R, AMB2560R for Ambassadeur 2500C series

Model

Microcast Spool AMB2520R (Spool rim level: 2mm)
Microcast Spool AMB2540R (Spool rim level: 4mm)
Microcast Spool AMB2560R (Spool rim level: 6mm)

Description

* Additional models from November 2017 use ultra-super duralumin shafts for all models, making them lighter.



Reel: Ambassadeur 2500C IAR
Microcast Spool AMB2520R CHAMPAGNE GOLD
Avail parts already installed on reel
Star Drag SD-AB-KSTR CHAMPAGNE GOLD
Pure Handle S 70mm CHROME
S size knob acrylic GREEN
Aluminum GM knob cap with hole CHAMPAGNE GOLD
Handle Nut for ABU M8 CHAMPAGNE GOLD
ABU 2500C High Speed Gear Set
COGWHEEL 5152 Bearing Model
13462 Pinion Bushing BB Kit
10255 Cogwheel RED
Ultra Light Level Winder Set CHAMPAGNE GOLD



Reel: Ambassadeur 2500Cl IAR
MicrocastSpool AMB2560R RED
Avail parts already installed on reel
Star Drag SD-AB-KSTR RED
Pure Handle S 70mm CHROME
S size knob acrylic RED
Aluminum GM knob cap with hole CHROME
Handle Nut for ABU M8 CHROME
ABU 2500C High Speed Gear Set
COGWHEEL 5152 Bearing Model
13462 Pinion Bushing BB Kit
10255 Cogwheel RED



Reel: Ambassadeur 2601C Elite
Spool MS-AMB2540R BLACK
Avail parts already installed on reel
Star Drag SD-AB-KSTL BLACK
S-TRAD Handle 70mm BLACK
Handle Nut for ABU M8 BLACK

Microcast spool for ABU Ambassadeur 2500C series.
Three types of spool rim level: 2.0 mm, 4.0 mm, and 6.0 mm.
AMB2520R and AMB2540R can be equipped with either a centrifugal brake or a magnet brake, your choice of brake unit, or both at the same time.
6.0mm is only available with stock centrifugal brakes or 4P-Brake 25C.

Genuine 2-point centrifugal brake is replaceable.
Special magnetic brakes for each model are available.
(optional product)

By replacing genuine spool with the Microcast spool, you will succeed in weight saving of reel.
This will help improve your cast with light-weight lures as well as cast further distance.

* Special magnetic brake also help you adjust the brake more finely.


Avail "Microcast Brake AMB1520" for Microcast Spool AMB2520R
http://www.hedgehog-studio.co.jp/phone/product/644


Avail "Microcast Brake AMB1540" for Microcast Spool AMB2540R
http://www.hedgehog-studio.co.jp/phone/product/644

* Fine tuning of the magnetic brake makes possible even with ABU reel.
Stainless steel E-ring for microcast spool shaft (inner diameter 2.4 mm x outer diameter 6 mm) is included.

For instructions on how to use the E-ring here
https://www.hedgehog-studio.co.jp/phone/page/290


Color

・Microcast Spool AMB2520R


MATTE BLACK


BLACK


GUNMETAL


RED


CHAMPAGNE GOLD

・Microcast Spool AMB2540R


MATTE BLACK


BLACK


GUNMETAL


RED


CHAMPAGNE GOLD

・Microcast Spool AMB2560R


MATTE BLACK


BLACK


GUNMETAL


RED


CHAMPAGNE GOLD


About Color



The color difference between BLACK and MATTE BLACK.
The glossy one is BLACK.


Spec

Basic Specifications

Material

Spool Part: Ultra-super duralumin (colored by anodizing)
Shaft part: Ultra-super duralumin (hard anodized)

Weight

Microcast Spool AMB2520R: 5.7g
Microcast Spool AMB2540R: unmeasured
Microcast Spool AMB2560R: 5.7g
Genuine spool 2500C:17.7g

Compatibility

ABU Ambassadeur 2500C / 2500CI
2500C IAR / 2500CS Rocket / 2500CDL / 2501C
2600C IAR / 2600C Elite / 2601C IAR / 2601C Elite
Can be used for OLD models (reissued, non-IAR, etc.)

Line Capacity

Spool Microcast Spool AMB2520R
6LB φ0.205mm 55m
8LB φ0.235mm 45m
10LB φ0.260mm 40m

Spool Microcast Spool AMB2540R
8LB φ0.235mm 75m
10LB φ0.260mm 70m
12LB φ0.285mm 60m

Spool Microcast Spool AMB2560R
12LB φ0.285mm 80m
14LB φ0.310mm 70m
16LB φ0.330mm 60m

The above values were measured using nylon line, wound up to the C surface of the spool.

How to use

The following explanation will be given for the ABU Garcia Ambassadeur 2500C IAR.



Remove the unit on the handle side and take out the spool.
As promised, be careful not to lose the brake blocks (the two grain-like parts).



As promised, be careful not to lose the brake blocks (the two grain-like parts).



Install a centrifugal brake (stock or our original 4P-Brake 25C).
* When using our magnetic brake, fit the attached plastic collar.



On the longer end of the shaft, install a coil spring for positioning.
For reels with bearings and cogwheels on the shaft side, such as the 2600C Elite, please be sure to install a coil spring.
Without the spring, the bearing will come off the frame and cannot be used properly.



Installation is completed. Adjust the mechanical brake.

* If you feather the reel with your thumb using the spool rim, the alumite may come off due to friction.
Feather a reel with your a thumb, use the spool's spool surface.