【Avail】 SHIMANO PALMING PLATE PPLATE-CNQ50 (for CALCUTTA CONQUEST 50/51)

Our Selling Price: US$33.27 [Regular Price: US$47.52]

Not available

Item Description

　Description of the product

PPLATE-CNQ50

This item is "side cover" for CALCUTTA CONQUEST 50/51
to make it lighter and fancy-looking.
We call the item "PALMING PLATE".

　Spool colors

・ CHAMPAGNE GOLD

CALCUTTA CONQUEST

・ RED

・ GREEN

・ BROWN

　Spec

| Material

PPLATE-CNQ50 : extra super duralumin (A2017)

| Compatibility

SHIMANO CALCUTTA CONQUEST 50/51

| Weight

PPLATE-CNQ50 : approx. 3.8g
<Weight of genuine plate> : approx. 6.2g

　How to replace

* Tools such as an adjustable wrench and a screw driver are necessary.

CALCUTTA CONQUEST

Loosen the knob which is under the mechanical brake knob
to open the side plate of the other side.

CALCUTTA CONQUEST

There is a fixing screw on a small brown plate.
Remove the screw to pull the shaft out of main unit.

CALCUTTA CONQUEST

Remove the E-shaped retainer on the shaft with a flat-blade screwdriver.
(Please make sure not to lose the retainer.

CALCUTTA CONQUEST

Take the all small parts off the shaft.
(aluminum pipe with a rubber ring, small brown plate, spring)

CALCUTTA CONQUEST

Take the shaft off the plate by turning it with an adjustable wrench.

CALCUTTA CONQUEST

Then tighten the shaft on a PPLATE-CNQ50 with an adjustable wrench.

CALCUTTA CONQUEST

Put those parts (aluminum pipe with a rubber ring, small brown plate, spring) back through the shaft as they were by holding them with your fingers.

CALCUTTA CONQUEST

Fix the E-shaped retainer to the groove of the shaft
while pushing down the aluminum pipe with your fingers.
(Please make sure not to lose the retainer.)

CALCUTTA CONQUEST

Place the shaft back into the main unit, and fix with the screw.

CALCUTTA CONQUEST

Place the "plate" at the right position, then tighten the knob under the Mechanical Brake knob to finish up.