| Dress-up parts that can be attached to spinning reels | |||||
 Reel stands and handle caps are easy to install as dress-up parts for spinning reels, yet have a custom impact. Various custom manufacturers have released parts, and the variety will continue to grow, so we have compiled a list so that you can compare them all together. It is also fun to combine reel stands and handle caps from the same manufacturer as the custom handles for a sense of unity, or to dare to combine them from different manufacturers and color-coordinate them. Also, not every spinning reel can be fitted with a handle cap reel stand. This is because reel thread standards, sizes, etc. are different. Within the small- to medium-sized spinning reels, they are roughly divided into the following four groups. Please select from the types that can be attached to your reel. The following groupings are based on HEDGEHOG STUDIO's criteria. (Group designations vary by custom manufacturer.) 1. Common to DAIWA and SHIMANO [Type A] It is the most common standard, and every custom parts manufacturer makes products that conform to this standard. Because it is designed for use with both DAIWA and SHIMANO, it has the largest number of compatible models, and most reels can be installed with this type. Note that there are no SHIMANO reels that can currently be attached to this type of reel if it is not listed as a compatible model. 2. for DAIWA 17 THEORY and later 2019 models [B type] DAIWA exclusive, not compatible with the aforementioned standard type. The typical compatible reel these days is the 17 Theory, but the Emeraldus MX and others were originally the first models. In the future, more and more DAIWA reels may be compatible with this type of reel. Also, even models with the same reel name, such as "EMERALDAS," "GEKKABIJIN," and "AEGIS," have different types that can be installed depending on the year and the "EX," "AIR," and "MX" that appear after the reel name, so please pay close attention to the compatible models. 3. DAIWA REVROS, EM MS, etc. [C type] Exclusive to DAIWA, this type of reel is the one in which when the handle is turned, the reel cap on the opposite side turns with it. 4. SHIMANO NASCI, etc. [D type] * Preparing for production 5. DAIWA SALTIGA, CATALINA, etc. [E type] DAIWA Dedicated to large offshore type reels. Currently, there is no reel stand that can be directly mounted, so an adapter from ideR Design will be used to mount the reel. 6. Abu MGX etc. [F type] Abu exclusive, currently there is no reel stand that can be directly attached to the reel, so an adapter from ideR Design will be used to attach the reel. 7. DAIWA 11 CALDIA, 13 AEGIS, etc. [G type] Exclusive to DAIWA, with special screw construction. Currently, there is no reel stand that can be directly mounted, so an adapter from ideR Design will be used to mount the reel. |
|||||
| 1. Common to DAIWA and SHIMANO [A type] | |||||
|
|||||
 |
|||||
 [HEDGEHOG STUDIO] Super Light Reel Stand While being extremely lightweight, it incorporates a two-component structure that allows the tip and base portions to be split, and we aimed for a uniquely sharp design that suits any reel.  [HEDGEHOG STUDIO] Handle Screw Cap HSC-SD-A Here is the standard A type for a number of reels. Since the product is available in a total of 12 colors and consists of two parts, it is possible to purchase two different colors and use the upper and lower parts in different colors.  [HEDGEHOG STUDIO] Handle Screw Cap Long HLC-SD-A A long type is newly added to the popular handle screw cap A type! This also has a two-part configuration, allowing for a variety of color variations. |
|||||
 |
|||||
 [ZPI] Reel Stand Light 64 Titanium RSL64T After machine-cutting 64 titanium material, craftsmen polish it by hand and apply PVD treatment to achieve titanium's unique glossy finish. By keeping the dead weight under 4.3g, it contributes to maintaining the dynamic balance of the entire tackle as well as protecting the reel. |
|||||
 |
|||||
 [LIVRE] Custom Balancer TYPE2 Sharp, three-dimensional design with laser markings Type2 is an image of a windmill with eight interwoven blades. The laser markings give it a sharp, three-dimensional design.  [LIVRE] Custom Balancer A full range of multifunctional equipment, including balance weights and line stoppers. It is a perfect match for LIVRE handles, so it is recommended to get a set with the handles. Eight color combinations are available.  [LIVRE] Custom Balancer Short The popular Custom Balancer is now available in a short type for small reels! Mainly matches reels in the 1000-2000 class. Eight color combinations are available. |
|||||
 |
|||||
 [DLIVE] Reel Cap i-ARM Plus "i-ARM Plus", a further evolution of the Reel Cap i-ARM The structure has been redesigned to enhance resistance to scratches. In addition, there is a lineup of long type and short type in different sizes. Available in 4 colors |
|||||
 |
|||||
 [GRATICA] Carbon Reel Defender (RD-01) Reel protection stand combining a lightweight, sharp aluminum body and carbon fiber. The simple yet eye-catching design suits any reel. |
|||||
 |
|||||
 [MTCW] Body Bumper Shaft #1 壱-ICHI- Two types of materials, ultra-high duralumin and titanium alloy, are used. Lineup of 8 types in total: 5 anodized colors, 2 mirror-finish types, and mirror-finish + quenching types |
|||||
 |
|||||
 [GLORY FISH] BODY KEEPER 7 (BK-007) Light, strong, and luxurious carbon blank design Equipped with hook hole and thread retaining rubber  [GLORY FISH] BODY KEEPER 9 (BK-009) It has a sophisticated form that can be installed on any grade. Equipped with a hook hanging hole. |
|||||
 |
|||||
 [MOREBITES] Body Keeper 5 This model is equipped with a convenient hook keeper at the tip. The design has been redesigned and is now better looking. Available in 7 colors  [MOREBITES] Body Keeper 4 The center section has a carbon-like design for a more racing look. Available in 6 colors  [MOREBITES] Body Keeper 5 This model is equipped with a convenient hook keeper at the tip. The design has been redesigned and is now better looking. Available in 7 colors |
|||||
 |
|||||
 [TSUBAKI KENKYUJO] OMAMORIKUN Reel stand made of machined aluminum with a simple design. Five colors are available.  [TSUBAKI KENKYUJO] OMAMORIKUN With Lure Eye Adjuster This model has a cutout at the end of the reel stand and an eye adjustment function.  [TSUBAKI KENKYUJO] OMAMORIKUN DX It is a gorgeous, gleaming model with a plated color coating.  [TSUBAKI KENKYUJO] OMAMORIKUN Plus This model has an O-ring attached to the surface of the reel stand, which has been improved to function as a line stopper.  [TSUBAKI KENKYUJO] OMAMORIKUN President This multifunctional model is equipped with both a hook hanger and a line stopper.  [TSUBAKI KENKYUJO] Premium OMAMORIKUN Multifunctional model equipped with both hook hanger and line stopper. Furthermore, by wrapping the carbon pipe, it has a racing appearance.  [TSUBAKI KENKYUJO] YORU NO OMAMORIKUN -OMAMORIKUN at Night- This model allows CHEMIHOTARU (Chemical Light) 25 to be built inside the reel stand. Convenient for locating your tackle when night fishing! One CHEMIHOTARU (Chemical Light) is included. |
|||||
 |
|||||
 [INX.label] REEL ARMOUR [TB340] Sharp and dressy pure titanium machined stick to protect your precious reels from scratches. The stick itself is also hard to place and scratch due to its calculated design. |
|||||
 |
|||||
 [SHIMANO genuine] 22 STELLA Titanium Reel Stand E type The long-selling reel stand has been redesigned. Three colors are available: silver, gray, and gold.  [SHIMANO genuine] YUMEYA Aluminum Reel Stand The long-selling reel stand has been redesigned. Three colors are available: silver, gray, and gold.  [SHIMANO genuine] Genuine Handle Screw Cap for 14 STELLA  [SHIMANO genuine] Genuine Handle Screw Cap for 14 STELLA 1000-2000 [Black]  [SHIMANO genuine] Genuine Handle Screw Cap for 13 STELLA SW  [SHIMANO genuine] Genuine Handle Screw Cap for 10 STELLA |
|||||
 |
|||||
 [DAIWA genuine] RCS Rolling Hook Holder This model is equipped with a convenient hook keeper at the tip for hooking lures such as Squid jig and spoons.  [DAIWA genuine/SLP WORKS] 22SLPW Spinning Handle Cap S This model is equipped with a convenient hook keeper at the tip for hooking lures such as Squid jig and spoons.  [DAIWA genuine] SLP WORKS Spinning Handle Cap S (with waterproof packing) |
|||||
 |
|||||
 [ideR Design] ideR Design Standby Me SBM-A1 Adapter for handle screw caps. By attaching to reel stands of various companies, the number of compatible models can be increased. |
|||||
| 2. DAIWA 17 THEORY or later, 2019 model compatible [B type] | |||||
(Main supported models) - 23 LEGALIS - 17 THEORY - 23 TATULA - 18 TATULA - 17 AEGIS - 22 CALDIA SW - 21 CALDIA - 18 CALDIA - 14 CALDIA - 21 FREAMS - 18 FREAMS - 19 BALLISTIC FW - 19 BALLISTIC LT - 23 LEXA - 19 LEXA - 18 SWITCH HITTER - 17 X FIRE - 14 X FIRE - 23 EMERALDAS RX - 19 EMERALDAS LT - 18 EMERALDAS AIR - 17 EMERALDAS MX - 14 EMERALDAS MX - 19 BATTLE GAME LBQD - 23 GEKKABIJIN - 20 GEKKABIJIN X - 18 GEKKABIJIN MX - 17 GEKKABIJIN AIR - 14 GEKKABIJIN - 18 BLAST - 23 LAXUS - 19 LAXUS LBD - 23 CYGNUS - 19 CYGNUS LBD - 16 PLAISO, etc. |
|||||
|
|||||
 [HEDGEHOG STUDIO] Handle Screw Cap HSC-SD-B This B type is compatible with 17 theory-based reels. Since the product is available in a total of 12 colors and consists of two parts, it is possible to purchase two different colors and use the upper and lower parts in different colors.  [HEDGEHOG STUDIO] Handle Screw Cap Long HLC-SD-B A new long type is also available for B-type handle screw caps! This also has a two-part configuration, allowing for a variety of color variations.  [HEDGEHOG STUDIO] Handle Screw Cap HSC-14CAL-M A limited edition model with gorgeous double anodized aluminum decorations. Caps with a strong presence can dress up the reels. |
|||||
|
|||||
[LIVRE] Custom Balancer TYPE2 Sharp, three-dimensional design with laser markings Type2 is an image of a windmill with eight interwoven blades. The laser markings give it a sharp, three-dimensional design. [LIVRE] Custom Balancer A full range of multifunctional equipment, including balance weights and line stoppers. It is a perfect match for LIVRE handles, so it is recommended to get a set with the handles. Eight color combinations are available. [LIVRE] Custom Balancer Short The popular Custom Balancer is now available in a short type for small reels! Mainly matches reels in the 1000-2000 class. Eight color combinations are available. |
|||||
|
|||||
[DLIVE] Reel Cap i-ARM Plus "i-ARM Plus Plus", a further evolution from Reel Cap and i-ARM Plus The structure has been redesigned to enhance resistance to scratches. In addition, there is a lineup of long type and short type in different sizes. Available in 4 colors |
|||||
|
|||||
 [GLORY FISH] BODY KEEPER 10 (BK-010) Sophisticated functional beauty Hook hole at the tip! Necessary and sufficient strength |
|||||
|
|||||
 [DAIWA genuine] 22SLPW Spinning Handle Cap S II  [DAIWA genuine] SLPW Spinning Handle Cap S II |
|||||
|
|||||
[ideR Design] ideR Design Standby Me SBM-C1 & C3 Adapter for handle screw caps. By attaching to reel stands of various companies, the number of compatible models can be increased. |
|||||
| 3. DAIWA REVROS, EM MS, etc. [C type] | |||||
(Main supported models) |
|||||
|
|||||
|
|||||
 [HEDGEHOG STUDIO] Handle Screw Cap Long HLC-SD-C New C type for EM MS and REVROS is now available for the handle screw cap long type! Dress up your reels with a wide variety of colors! It also helps prevent scratches on the reel. |
|||||
|
|||||
 [GLORY FISH] BODY KEEPER 8 (BK-008) Sophisticated functional beauty Hook hole at the tip! Necessary and sufficient strength |
|||||
|
|||||
 [MOREBITES] Handle Cap 2 Aluminum handle caps for a little color customization. Three color lineup  [MOREBITES] Body Keeper 3 The simple design both prevents scratches on the reel and dresses up the reel. Three color lineup |
|||||
|
|||||
 [ideR Design]ideR Design Standby Me SBM-D3 & D4 Adapter for handle screw caps. By attaching to reel stands of various companies, the number of compatible models can be increased. |
|||||
| 6. Abu Revo MGX, etc. [F type] | |||||
|
|||||
 [ideR Design]ideR Design Standby Me SBM-F1 Adapter for handle screw caps. By attaching to reel stands of various companies, the number of compatible models can be increased. |
|||||
| 7. DAIWA 11 CALDIA, 13 AEGIS, 13 BLAST, etc. [G type] | |||||
(Main supported models) - 11 CALDIA - 13 AEGIS - 13 BLAST, etc. |
|||||
|
|||||
 [ideR Design]ideR Design Standby Me SBM-B1 & B3 Adapter for handle screw caps. By attaching to reel stands of various companies, the number of compatible models can be increased. | |||||
| Discontinued Items | |||||
 [HEDGEHOG STUDIO] Handle Screw Cap HSC-SH-M This is a handle screw cap made exclusively for SHIMANO, with a gleaming double-anodized finish.  [HEDGEHOG STUDIO] Handle Screw Cap HSC-CA-S Handle screw cap for 11 CALDIA and 13 AEGIS only. This is a prototype model with a two-part construction. A variety of 4 x 4 color combinations are available.  [ZPI] Reel Stand Light RSL01 Model 01 common to DAIWA and SHIMANO. The lightweight, smart and simple design matches any reel without discomfort. Standard six-color lineup.  [ZPI] Reel Stand Light RSL02 17 THEORY base compatible 02 model. The lightweight, smart and simple design matches any reel without discomfort. Standard five-color lineup.  [ZPI] Carbon Reel Stand Super Light Luxurious reel stand with ultra-lightweight carbon shaft. It is available in silver and gold.  [LIVRE] Reel Cap This reel cap has a simple yet striking metal presence. If you want to customize a cap that is not too flashy to match your handle, this is a good choice. Eight color combinations are available.  [DLIVE] Reel Cap i-ARM The Reel Cap features a massive presence of machined aluminum. The tip of the cap is equipped with a hook keeper for convenient hooking of lures. Available in 4 colors  [34] Original Balancer III The beauty of form is realized by precise machine cutting. This is a special balancer designed to match the design concept of the 34 ZEROGRA Double Handle Ver. 3. Two color lineup  [MOREBITES] Body Keeper 6 Colorful handle caps made of machined aluminum. Available in 7 colors  [MOREBITES] Aluminum Handle Cap Colorful handle caps made of machined aluminum. Available in 7 colors  [TSUBAKI KENKYUJO] OMAMORIKUN 2 Reel stand made of machined aluminum with a simple design. This type has a rounded design and glossy color.  [TSUBAKI KENKYUJO] OMAMORIKUN 2 UL Lightweight type made of plastic material. The white color is also unusual for this reel stand.  [SHIMANO genuine] YUMEYA 18 STELLA Titanium Reel Stand C type One whole piece is luxuriously machined from solid titanium material. This reel stand has a luxurious feel.  [SHIMANO genuine] YUMEYA 14 STELLA Titanium Reel Stand Ultra-premium reel stand made of titanium. Special parts for STELLA.  [SHIMANO genuine] YUMEYA 08 STELLA SW Titanium Reel Stand Ultra-premium reel stand made of titanium. This is a large size that can be mounted on STELLA SW.  [ideR Design] ideR Design Standby Me SBM-E1 Adapter for handle screw caps. By attaching to reel stands of various companies, the number of compatible models can be increased. |