Bait reel star drag of choice (Shimano bait reel ed.)

Regardless of the manufacturer, star drag the bait reel that is mounted between the handle and the body.
This part is for the same function as the Doragunobu of spinning reel, is the part for adjusting the line emission of when the spool is reversed, with tightness.




Here we will promote the story in the fact that the case of bass fishing.

In the spinning reel, for use mainly thin line, set the finely dense tightened in order to prevent a line break.

However, because mainly worried about the line break is not about to use a thick line in the bait reel, it can be finely adjusted as spinning reel does not have much. Rather, the spool is not hooked up firmly slipped, such as during hooking, (tighten firmly) always full lock in order to prevent the trouble such as the state, is often hooking power is setting as transmitted to hook directly.



Although a star drag that is not too much attention while having such a function, has been released a variety of types from each manufacturer as one of the important parts to improve the appearance and performance as custom parts.


Benefits:

very eye-catching as ① color anodized parts
most color parts that have been released because of the monochromatic color, looks outstanding at the time of installation. Since materials such as duralumin and carbon is used in the material, it is also possible to produce a feeling of luxury. In addition, compared with the genuine, because in many cases also design, such as the extension of the increase and the arm length of the arm number has been changed, can also be also different impression than the genuine state.

② delicate performance improvement of the reel
Star drag that has been released from the custom manufacturers will differ from basically the structure is genuine star drag. Convenience thereby Although it is needless to say that the appearance is changed, or so one hand in line slug operation by extending the arm length can be, such as or to improve the operability by increasing the number of arms, and it is a fine can be Do features have been installed.


Disadvantages:

in particular, No (laughs)

if by force increase, but you might get the impression a little too flashy is by the color of the parts, it is also possible correspondence because it is quiet color lineup, such as Gun Metal according to the commodity.



From the above, the exchange of the star drag is the fact that the full benefits.

But, I think in fact to replace the star drag, and some people are also puzzled to say.

Have been released from the integrated anywhere in the manufacturer, what products that can be attached to your reel. Note point at the time of attachment? Should larger question like.


But, when replacing the basic star drag is,

what to choose a manufacturer of parts ①

② yourself of star drag lineup compatible with the reel located in one

of or combined with the ③ any manufacturer handle

the three points caution is okay if you can.
It is whether such piece does that mean each will be sequentially explained!


Or choose the ① part of any manufacturer

Shimano bait reel for the star drag with handling at our company is avail-made and made ZPI There are two companies products.

◆ avail made
basically the arm than the number of genuine star drag is one of many design mainstream. 13 Metaniumu and 14 Calcutta Conquest in addition to design features which claims to SeiYoshi not too flashy and a wide range of line-up, such as for the scorpion and the like.

◆ ZPI made
basically genuine star is characterized by the drag arm length is extended from. Star by extending the arm length of the drag it possible to handle the operation with one finger, famous for it has developed the industry's first functional parts Pentagram star drag the line to achieve a slug process with one hand.

Here, I think let's go a conformity check between the two companies of the star drag and each manufacturer handle.


When you try to specifically comparison. . . .



I feel like this.
(From left, 14 chalcone genuine star drag, avail hexagonal star drag, ZPI Pentagram star drag)

when you try to compare the product of genuine star drag and the two companies, avail hexagonal star drag is increased number of arms, the arm length it extends a little. ZPI Pentagram star drag is the same as what number of arms, but it is very large and look for the feature because the arm length is considerably extended.


Next, I tried to compare its own weight.



Normally, I color parts class is something which is lighter than genuine parts, but is not responsible for these star drag, has become heavy only on the relationship between a little bit of size and or extend an arm length or increase in the number of arms is larger.


　② Is there my conform to the reel star drag of lineup

If you have determines the manufacturer, the next step is to select the star drag that suit your reel.

Basically, star drag on the structure, rather than to correspond to a wide range of reel in one of the products, this reel is often manufactured and sold as a dedicated model so that this star drag.

If such is, I think that easy to understand because it is often listed the reel name, such as in the title. In addition, you can also check there should So there is a description of the products conforming to each product description page.

If you have, such as if you do not know I think that you please contact us.




　③ whether combined with any manufacturer of handle

And, the hardest part in the custom of the star drag is compatible check with custom handle.

Basically, each manufacturers selling star drag, because regard to the genuine handle and their products custom handle of sells perform the mounting confirmation, cause problems when used in regard to the two handles it is not so much that.


The problem is, such as installing a custom handle of the star drag and avail of ZPI "If you are attempting to mounting a combination of different manufacturers products" is.


In this case, you need to actually check before installing.



Although a concrete way. . .

For example, the attachment can be custom handle to Shimano bait reel, avail made · ZPI-made studio composite made · LIVRE made , such as is there available.

These custom handle there is a straight type and offset type in the shape of the handle body, what may not be able to mounting generated by a combination of parts custom handle of the offset type is when you use.
(※ Since the custom handle of straight-type can be mounted basically all of the star drag, this play we will omit the description)


and you will be described in more detail with respect to whether or not the attachment. . .




The photo above is an example that can not be mounted.
When you install a part, is to interfere with the offset portion of the arm tip and offset handle of the star drag, it is not possible to turn the star drag normally, because the symptoms occurs that the drag is not close.




Photos on here is an example that can be mounted.
As in the photo, if available is a gap between the offset portion of the arm tip and offset handle of the star drag, is no problem.


More will be the point should be checked at the time of mounting.

From here Furthermore, a combination of manufacturers symptoms of the above does not come out, we will if you learn how to avoid it even got out the symptoms!


　Conformity check

As mentioned earlier, conformity check of the same manufacturer parts because (of the star drag + avail of avail handle, star drag + ZPI of the handle of the ZPI) is confirmed by the respective manufacturers, here between different manufacturers I think let's examine the fit.

In addition, when compared to the size of each star drag, because Pentagram star drag of ZPI is the largest, other companies of the star drag is to handle the mounting confirmation is made of this star drag You can also judged to be mounted.


◆ ZPI Pentagram star drag + avail STi2 offset handle



it's the suddenly the most in the first mounting example. . . .
If this is a combination, it can not be attached to interfere with each other parts (sweat)

but is, you can be installed by adding certain parts!

It has been released from avail "Shimano offset handle STi 2 adjustment washers 0.5 mm" 1 piece of, and sandwiched between the handle body and the star drag, you can use normally there is no interference between parts.
(※ The Pentagram star drag, there are also goods which is adjusted for the washer depending on the product has been shipped. In that case it does not matter if I use the adjustment washer The included)


◆ZPI Pentagram star drag + LIVRE offset handle



and is this combination, it can be installed without any problems.



◆Avail hexagonal star drag + ZPI offset carbon handle



in this combination, without any particular additional parts, it is possible to mounting.


　Please contact us if there is a combination you want to check!

Although there is a part, we have described regard the combination and methods that can be adapted confirmed in the current this side.


As we have so far to explain, at the time of exchange of the star drag,


what to choose a manufacturer of parts ①

② yourself of star drag lineup compatible with the reel located in or

whether the combination with the ③ any manufacturer handle


check the I think that problem without any attachment can be appreciated.

We also updated from time to time will the future but, please contact us if you have, such as if the parts you want to see in everyone combination and any questions. Check the availability here, we will report at a later date.




　Star drag Products for Shimano


[Avail] hexagonal star drag SD-HEX-SH
Price: 4,300 yen (excluding tax)

- Material: Aluminum
Weight: SD-HEX-SH: 7.9g / genuine star drag: 5.4 g of - 7.1 g
· Color: Black Gun Metal Red Purple Sky Blue Champagne Gold

(corresponding models)
16 Metaniumu MGL · 15 Metaniumu DC · 13 Metaniumu
16 Casitas MGL
15 Conquest 100HG · 14 Conquest 100-14 Conquest 200
mounted not on the (※ 15 Conquest 200HG)
15 clad 200
14 Scorpion 200
14 Kuronaku CI4 + 150
12 Antares ※ mechanical brake knob exchange necessary

https://www.hedgehog-studio.co.jp/product/1836
[Avail] 15 original for Aldebaran 50 star drag SD-ALD15
Price: 4,300 yen (excluding tax)

- Material: Aluminum
Weight: SD-ALD15: 5.8g / genuine star drag: 5.0G
-Color: Black Red Sky Blue Champagne Gold

(compatible models)
16 Aldebaran BFS
15 Aldebaran 50 - 51
15 Aldebaran · 51HG 50HG

https://www.hedgehog-studio.co.jp/product/2200
[Avail offset star drag SD-MT13-A (16 Metaniumu MGL · 15 Metaniumu DC · 13 Metaniumu only)
Price: 4,300 yen (excluding tax)

- Material: Aluminum
Weight: SD-MT13-A: 7.2g / genuine star drag: 7.1 g
· Color: Red Purple Champagne Gold Blue Sky Blue Black

(compatible models)
16 Metaniumu MGL · 15 Metaniumu DC · 13 Metaniumu

https://www.hedgehog-studio.co.jp/product/1616
[Avail offset star drag SD-SCPXT
Price: 3,800 yen (excluding tax)

- Material: Aluminum
Weight: SD-SCPXT: 8.2g / genuine star drag: 5.0G
-Color: Black Gun Metal Red Purple

(compatible models)
14 Bureniasu
11 Scorpion DC, DC7
10 Scorpion XT1000
09 Scorpion · XT1500-7 XT1500

https://www.hedgehog-studio.co.jp/product/3662
[Avail offset star drag SD-EXDC
Price: 3,800 yen (excluding tax)

- Material: Aluminum
Weight: SD-EXDC: 9.2g / genuine star drag: 5.5 g of
-Color: Black Gun Metal Red Sky Blue Champagne Gold

(compatible models)
12 Aix sense DC
11 Basuwan XT

https://www.hedgehog-studio.co.jp/product/3761
[Avail / avail] 12 Calcutta dedicated star drag SD-12CC
Price: 3,600 yen (excluding tax)

- Material: Aluminum
Weight: SD-12CC: 6.2 g of
-Color: Black Gun Metal Red

(compatible models)
12 Calcutta 100, 101
12 Calcutta 200, 201
for the ※ 12 Kolkata (Calcutta) 300 - 400 It is unconfirmed.

https://www.hedgehog-studio.co.jp/product/1877
[Avail] 12 Aldebaran BFS dedicated star drag SD-ALD12-A
Price: 4,300 yen (excluding tax)

- Material: Aluminum
Weight: SD-ALD12-A: 5.9g / genuine star drag: 7.1g (12 models)
Color: Black Gun Metal Red Purple Blue Sky Blue Gold pink

(compatible models)
12 Aldebaran BFS XG
15 Aldebaran BFS XG Limited

https://www.hedgehog-studio.co.jp/product/388
[ [Avail] original star drag SD-ALD09-A
Price: 4,200 yen (excluding tax)

- Material: Aluminum
Weight: SD-ALD09-A: 5.5g / genuine star drag: 6.1 g of
-Color: Black Gun Metal Red Purple Pink Sky Blue Gold Blue

(corresponding models)
09 Aldebaran · Mg7 Mg
※ Others have adapted well as in primary Antares. For more information to the following link.

https://www.hedgehog-studio.co.jp/product/1882
[Avail] original star drag SD-MT07
Price: 4,200 yen (excluding tax)

- Material: Aluminum
Weight: SD-MT07: 5.5g / genuine star drag: 6.6 g of
-Color: Red Purple Sky Blue Champagne Gold

(compatible models)
08 Metaniumu-MgDC7 MgDC
07 Metaniumu · Mg7 Mg
01 Calcutta Conquest · 200 100
※ Others have adapted, such as the Scorpion DC. For more information to the following link.

https://www.hedgehog-studio.co.jp/product/2159
[Avail] Original for Calcutta Conquest 50 star drag SD-CNQ05A
Price: 4,000 yen (excluding tax)

- Material: Aluminum
Weight: SD-CNQ05A: 5.5 g of
-Color: Red Champagne Gold

(compatible models)
01 Calcutta Conquest 50 - 51
01 Calcutta Conquest-51S 50S

https://www.hedgehog-studio.co.jp/product/1765
[Avail] Original for Calcutta Conquest 50 star drag SD-SH-CNQ
Price: 4,000 yen (excluding tax)

- Material: Aluminum
Weight: SD-CNQ: 5.5 g of
-Color: Green Brown

(compatible models)
01 Calcutta Conquest 50 - 51
01 Calcutta Conquest-51S 50S

https://www.hedgehog-studio.co.jp/product/1021
[Avail] original star drag SD-SCP-A
Price: £ 3,620 (excluding tax)

- Material: Aluminum
Weight: SD-SCP-A: 5.6 g of
-Color: Black Gun Metal Red Navy Purple

(compatible models)
Scorpion 1000
Scorpion 1000Mg

https://www.hedgehog-studio.co.jp/product/384


[ZPI] Pentagram for Shimano star drag PSD-13 (for 16 Metaniumu MGL · 15 Metaniumu DC · 13 Metaniumu)
Price: 5,500 yen (excluding tax)

Weight: PSD-13: 5.9 g of
-Color: Red Blue Purple Gun Metal Gold

(compatible models)
16 Metaniumu MGL · 15 Metaniumu DC · 13 Metaniumu

https://www.hedgehog-studio.co.jp/product/3470
[ZPI] Pentagram star drag PSD-07 (15 Aldebaran, for 16 Aldebaran BFS XG)
Price: 5,500 yen (excluding tax)

Weight: PSD-07: TBD
Color: Red Blue Purple

(compatible models)
16 Aldebaran BFS
15 Aldebaran 50 - 51
15 Aldebaran-51HG 50HG

https://www.hedgehog-studio.co.jp/product/3469
[ZPI] Pentagram star drag PSD-06 (for 14, 15, Calcutta Conquest)
Price: 5,500 yen (excluding tax)

Weight: PSD-06: about 5.9 g of
-Color: Red Blue Purple Gold

(compatible models)
15 Calcutta Conquest-200HG 100HG
14 Calcutta Conquest 100 - 200
Oshia Conquest 200PG · 200HG

https://www.hedgehog-studio.co.jp/product/3471
[ZPI] BFC Pentagram star drag BFD04 (for 12 Aldebaran BFS)
Price: 5,500 yen (excluding tax)

Weight: PSD-04: TBD
Color: Red Blue Purple

(compatible models)
12 Aldebaran XG BFS

https://www.hedgehog-studio.co.jp/product/3472