Bearing method of replacing the DC unit Shimano 11 Scorpion DC / DC7

---

First, remove the two screws that secure the side cover plate.

After removing the side cover plate and remove the three screws that secure the body and the DC unit.

Now, it can decompose the reel body spool · DC unit.

Remove the three screws in the removed DC unit.

You can be the replacement of the bearings and decomposition so far.

Bearing bearing stopper ring can be easily removed by using the such as flathead screwdriver because it is only been fixed in.
By removing the bearing stopper ring enables genuine bearing is taken out exchange.
It should be noted, bearing stopper ring Please use, for example, when the preliminary even that has been damaged or lost because the offers.

If the bearing is difficult to take out the handle knob cap remover you can easily exchange work be taken out as hooking using.

After bearing exchange, carried out the assembly in the reverse order, it is the last work completed if there is no check the rotation of the spool problem.